Real-time energy forecasting on edge devices represents a major challenge for smart grid optimization and intelligent buildings. We present LAD-BNet (Lag-Aware Dual-Branch Network), an innovative neural architecture optimized for edge inference with Google Coral TPU. Our hybrid approach combines a branch dedicated to explicit exploitation of temporal lags with a Temporal Convolutional Network (TCN) featuring dilated convolutions, enabling simultaneous capture of short and long-term dependencies. Tested on real energy consumption data with 10-minute temporal resolution, LAD-BNet achieves 14.49% MAPE at 1-hour horizon with only 18ms inference time on Edge TPU, representing an 8-12 x acceleration compared to CPU. The multi-scale architecture enables predictions up to 12 hours with controlled performance degradation. Our model demonstrates a 2.39% improvement over LSTM baselines and 3.04% over pure TCN architectures, while maintaining a 180MB memory footprint suitable for embedded device constraints. These results pave the way for industrial applications in real-time energy optimization, demand management, and operational planning.

Deploying emotion recognition systems in real-world environments where devices must be small, low-power, and private remains a significant challenge. This is especially relevant for applications such as tension monitoring, conflict de-escalation, and responsive wearables, where cloud-based solutions are impractical. Multimodal emotion recognition has advanced through deep learning, but most systems remain unsuitable for deployment on ultra-constrained edge devices. Prior work typically relies on powerful hardware, lacks real-time performance, or uses unimodal input. This paper addresses that gap by presenting a hardware-aware emotion recognition system that combines acoustic and linguistic features using a late-fusion architecture optimised for Edge TPU. The design integrates a quantised transformer-based acoustic model with frozen keyword embeddings from a DSResNet-SE network, enabling real-time inference within a 1.8MB memory budget and 21-23ms latency. The pipeline ensures spectrogram alignment between training and deployment using MicroFrontend and MLTK. Evaluation on re-recorded, segmented IEMOCAP samples captured through the Coral Dev Board Micro microphone shows a 6.3% macro F1 improvement over unimodal baselines. This work demonstrates that accurate, real-time multimodal emotion inference is achievable on microcontroller-class edge platforms through task-specific fusion and hardware-guided model design.

This paper presents the design and implementation of an AI vision-controlled orthotic hand exoskeleton to enhance rehabilitation and assistive functionality for individuals with hand mobility impairments. The system leverages a Google Coral Dev Board Micro with an Edge TPU to enable real-time object detection using a customized MobileNet\_V2 model trained on a six-class dataset. The exoskeleton autonomously detects objects, estimates proximity, and triggers pneumatic actuation for grasp-and-release tasks, eliminating the need for user-specific calibration needed in traditional EMG-based systems. The design prioritizes compactness, featuring an internal battery. It achieves an 8-hour runtime with a 1300 mAh battery. Experimental results demonstrate a 51ms inference speed, a significant improvement over prior iterations, though challenges persist in model robustness under varying lighting conditions and object orientations. While the most recent YOLO model (YOLOv11) showed potential with 15.4 FPS performance, quantization issues hindered deployment. The prototype underscores the viability of vision-controlled exoskeletons for real-world assistive applications, balancing portability, efficiency, and real-time responsiveness, while highlighting future directions for model optimization and hardware miniaturization.

This machine learning study investigates a lowcost edge device integrated with an embedded system having computer vision and resulting in an improved performance in inferencing time and precision of object detection and classification. A primary aim of this study focused on reducing inferencing time and low-power consumption and to enable an embedded device of a competition-ready autonomous humanoid robot and to support real-time object recognition, scene understanding, visual navigation, motion planning, and autonomous navigation of the robot. This study compares processors for inferencing time performance between a central processing unit (CPU), a graphical processing unit (GPU), and a tensor processing unit (TPU). CPUs, GPUs, and TPUs are all processors that can be used for machine learning tasks. Related to the aim of supporting an autonomous humanoid robot, there was an additional effort to observe whether or not there was a significant difference in using a camera having monocular vision versus stereo vision capability. TPU inference time results for this study reflect a 25% reduction in time over the GPU, and a whopping 87.5% reduction in inference time compared to the CPU. Much information in this paper is contributed to the final selection of Google's Coral brand, Edge TPU device. The Arduino Nano 33 BLE Sense Tiny ML Kit was also considered for comparison but due to initial incompatibilities and in the interest of time to complete this study, a decision was made to review the kit in a future experiment.

In this work, we evaluate the energy usage of fully embedded medical diagnosis aids based on both segmentation and classification of medical images implemented on Edge TPU and embedded GPU processors. We use glaucoma diagnosis based on color fundus images as an example to show the possibility of performing segmentation and classification in real time on embedded boards and to highlight the different energy requirements of the studied implementations. Several other works develop the use of segmentation and feature extraction techniques to detect glaucoma, among many other pathologies, with deep neural networks. Memory limitations and low processing capabilities of embedded accelerated systems (EAS) limit their use for deep network-based system training. However, including specific acceleration hardware, such as NVIDIA's Maxwell GPU or Google's Edge TPU, enables them to perform inferences using complex pre-trained networks in very reasonable times. In this study, we evaluate the timing and energy performance of two EAS equipped with Machine Learning (ML) accelerators executing an example diagnostic tool developed in a previous work. For optic disc (OD) and cup (OC) segmentation, the obtained prediction times per image are under 29 and 43 ms using Edge TPUs and Maxwell GPUs, respectively. Prediction times for the classification subsystem are lower than 10 and 14 ms for Edge TPUs and Maxwell GPUs, respectively.

Tensor Processing Units (TPUs) are specialized hardware accelerators for deep learning developed by Google. This paper aims to explore TPUs in cloud and edge computing focusing on its applications in AI. We provide an overview of TPUs, their general architecture, specifically their design in relation to neural networks, compilation techniques and supporting frameworks. Furthermore, we provide a comparative analysis of Cloud and Edge TPU performance against other counterpart chip architectures. Our results show that TPUs can provide significant performance improvements in both cloud and edge computing. Additionally, this paper underscores the imperative need for further research in optimization techniques for efficient deployment of AI architectures on the Edge TPU and benchmarking standards for a more robust comparative analysis in edge computing scenarios. The primary motivation behind this push for research is that efficient AI acceleration, facilitated by TPUs, can lead to substantial savings in terms of time, money, and environmental resources.

Computing at the edge is important in remote settings, however, conventional hardware is not optimized for utilizing deep neural networks. The Google Edge TPU is an emerging hardware accelerator that is cost, power and speed efficient, and is available for prototyping and production purposes. Here, I review the Edge TPU platform, the tasks that have been accomplished using the Edge TPU, and which steps are necessary to deploy a model to the Edge TPU hardware. The Edge TPU is not only capable of tackling common computer vision tasks, but also surpasses other hardware accelerators, especially when the entire model can be deployed to the Edge TPU. Co-embedding the Edge TPU in cameras allows a seamless analysis of primary data. In summary, the Edge TPU is a maturing system that has proven its usability across multiple tasks.

Medical image segmentation can be implemented using Deep Learning methods with fast and efficient segmentation networks. Single-board computers (SBCs) are difficult to use to train deep networks due to their memory and processing limitations. Specific hardware such as Google's Edge TPU makes them suitable for real time predictions using complex pre-trained networks. In this work, we study the performance of two SBCs, with and without hardware acceleration for fundus image segmentation, though the conclusions of this study can be applied to the segmentation by deep neural networks of other types of medical images. To test the benefits of hardware acceleration, we use networks and datasets from a previous published work and generalize them by testing with a dataset with ultrasound thyroid images. We measure prediction times in both SBCs and compare them with a cloud based TPU system. The results show the feasibility of Machine Learning accelerated SBCs for optic disc and cup segmentation obtaining times below 25 milliseconds per image using Edge TPUs.

This paper explores the performance of Google's Edge TPU on feed forward neural networks. We consider Edge TPU as a hardware platform and explore different architectures of deep neural network classifiers, which traditionally has been a challenge to run on resource constrained edge devices. Based on the use of a joint-time-frequency data representation, also known as spectrogram, we explore the trade-off between classification performance and the energy consumed for inference. The energy efficiency of Edge TPU is compared with that of widely-used embedded CPU ARM Cortex-A53. Our results quantify the impact of neural network architectural specifications on the Edge TPU's performance, guiding decisions on the TPU's optimal operating point, where it can provide high classification accuracy with minimal energy consumption. Also, our evaluations highlight the crossover in performance between the Edge TPU and Cortex-A53, depending on the neural network specifications. Based on our analysis, we provide a decision chart to guide decisions on platform selection based on the model parameters and context.

It's almost common knowledge that machine learning requires more computational power than your average day-to-day tasks. With a variety of offerings from Google, NVIDIA, Intel and others that range from TPUs, tensor cores to GPUs, it's becoming increasingly difficult to choose hardware for Edge ML tasks. In this article, I aim to shed some light on the technologies that are available on the market and your options when it comes to hardware for both machine learning training and inferencing on the edge. Machine learning is a broad field that has seen tremendous progress in the recent years. It is based on the principle that a computer can autonomously improve its own performance on a given task by learning from data – sometimes even beyond the capabilities of humans.